Our Workshop

Processing and Polishing

Who we are

We tell you our story

The company, operated family-style for generations, has been active in the territory since 2005. However, its history and roots were founded many years ago with the birth and growth of the stylish furniture industry in Città di Castello (Perugia, Italy). On the strength of the experience gained over the years, we opened the La Bottega del Falegname (Carpenter's shop) a few years ago. Our main feature is to offer the customer a product made "to measure" according to individual needs and the space available. The company is specialized in the study, design and manufacture of furniture and furnishing accessories. Below, we illustrate the main stages in creating your furniture.. 

Below we illustrate the main phases in which the creation of a piece of furniture is articulated.

Production and design creation:

The first step is to arrange a meeting with you to take the measurements and inspect area. Once this is done, we will create a scale drawing that will represent the furnishing of your choice. Inside, you will find every detail; we will take care to make this design as clear and simple to read as possible.

.

Image
Image

Choice of materials

You may choose the type of wood to use, although, as always, we will advise you and direct you to the best option.

Types of Wood

National walnut & Canaletto walnut:

The most valuable and costly wood. The veining creates esthetic motifs that increase its value. It works well, although "it is more challenging than chestnut" and has a wormhole appearance. The local black walnut is even rarer and more valuable.

Chestnut:

IThe most widely used wood for window frames, sideboards, chests of drawers and other kitchen furniture. It was also used for beams in small houses. It was highly resistant, but demanded a long seasoning before use. Often the carpenters supported the boards on the wall of the house for the water from the eaves to run over them, washing off the "tannin," a substance produced by the chestnut.

Poplar:

Used for less expensive furniture and, when before plywood was available for those more valuable. The Agathon cottonwood, now almost entirely disappeared, had similar veining to walnut and would be used once it was varnished if walnut was not available or they did not want to cut the precious fruit tree. The Agathon, tall and sturdy, was suitable for long beams; after the seasoning, it became light and easy to handle and transport.

Toulipiér:

This is a wood that is obtained from the trunks of liriodendron tulipifera, a tree from the Central Eastern area of the United States. Its name, derived from the French, comes from its flowers, similar to yellow tulips. Being a tree that grows tall and straight, it provides timber with characteristics of machinability, stability and specific gravity that make it suitable for a multitude of uses. It has light colors and prominent dark or greenish veins with mottling and medium-hard consistency. It is particularly appreciated, in addition to being economical, for the excellent reaction to treatments with paints, stains and fillers; when dyed, it resembles walnut.

Oak:

Oak wood was used rarely for furniture because it is hard to work; it must be completely dry and slightly firm; that is, without sap. Currently, it is often used for the production of stairs, steps and external doors, which tend to be highly prized.

Cherry:

Suited for furniture In the past, rooms could be furnished in either walnut or cherry; the two types of wood were not mingled. There are those who prefer a red hue similar to mahogany, or au naturel.

Beech:

Quality may vary. Because of its flexibility, it was suitable for the shafts of oxcarts and handcarts. Currently it works very well for cutting boards and pastry boards.

Pine:

It is not a fine wood. The tree is difficult to work; it is hard to cut. However, forest pine is often used. Today, the best quality wood is from Sweden because it is very ductile.

Spruce:

Forest wood was found in planks in a few local stores or hardware stores. It was used for beams, window frames, furniture and kitchen furnishings, and bedroom furniture bases. The best spruce sawmills are located in Austria.

Type of polish and decoration

Dopo aver deciso il materiale, è la volta della scelta del colore e delle sue eventuali finiture. All'interno dell'azienda abbiamo un vasto campionario di colori da consultare e scegliere per il proprio arredamento.

Tipi di Lucidatura e Decorazione

Finishing spray, walnut and cherry color

Varnish over gesso

Antique buffed finish

Modern and synthetic varnish

Wax finishing

Decorated furniture

Furniture finishing and choice of color

After deciding on the material, it is time to choose the color and possible finishes. Within the company, we have a broad spectrum of colors to see and choose for your furniture:

On completing these steps your furniture will be polished and decorated based on the chosen finish and finally delivered to your favorite spaces !

We are waiting for you in the company

We are waiting for you in our JOINERY, home for the design and production of furniture and furnishings for the home (E45 highway exit "Alto Tevere logistics base", then continue straight for 100m and take the first road on the right to via Elio Vittorini, number 2 / B ).

falegnameria fuori

Come and visit us in our SHOWROOM (E45 expressway exit E45 "Alto Tevere logistics base", as soon as you exit continue for 50 meters and the building will be on your right) where we see and touch our production of Furniture and Home Furnishings.

showroom la bottega del falegname a città di castello

Would you like to know more ?
Request Information Now !

Ask for Onliine Quote !

Send us photographs, measurements and everything necessary to be able to draw up a detailed estimate.

Make an appointment and come to our showroom !


Fill in the form

Or call the number now:

+39 075 - 851 17 28

Drag and drop files here or Browse
Allowed Files: .jpg, .png, .gif, .pdf, .dwg, .psd, .tif, .zip, .rar

How to reach us

We are waiting for you in our JOINERY, home for the design and production of furniture and furnishings for the home (exit E45 way "Alto Tevere logistics base", then continue straight for 100m and then the first road on the right to via Elio Vittorini, 2 / B).

falegnameria fuori

Come and visit us in our SHOWROOM (exit E45 way "Alto Tevere logistics base", as soon as you exit continue for 50 meters and the building will be on your right) where you will be able to see and touch our production of Home Furniture and Furnishings.

showroom la bottega del falegname a città di castello

Look where we are

+39 075 8511728 - Via Elio VIttorini, Città di Castello (PG - Italy)